Virgin Textile Grade R.V2.45 SD Nylon 6 Resin 

Because nylon Pa6 is easy to absorb moisture, special attention should be paid to drying before processing. If the nylon 66 material is supplied in a waterproof material package, the device should remain sealed. If the humidity is greater than 0.2%, it is recommended to dry in hot air above 80°C for 16 hours. If the nylon material is exposed to air for more than 8 hours, vacuum drying at 105°C for more than 8 hours is recommended. Melting temperature: 230-280°C, 250-280°C for enhanced varieties. Mold temperature: 80-90 ℃, the mold temperature significantly affects the crystallinity, and the crystallinity affects the mechanical properties of the plastic parts. Crystallization of structural components The degree of temperature is important, so the recommended mold temperature is 80-90°C. Higher mold temperatures are also recommended for thin-walled, long-running plastic parts. Increase Higher mold temperatures can increase the strength and stiffness of plastic parts, but reduce toughne…