VENEER ROLLER DRYER Plywood manufacturing equipment Based on 31+years of engineering and manufacturing experience in the plywood industry Single board roller dryer - technical overview The veneer roller dryer is used to continuously dry the wet veneers after rotary cutting to the required moisture content before veneer splicing, gluing, and hot pressing. Wet veneers are continuously transported between multiple heating and cooling zones through multiple layers of rollers. High speed circulating hot air transfers heat to the veneers, while the evaporated moisture is carried away by a controlled dehumidification system. The most critical technical requirement for this equipment is to achieve the most uniform final moisture content throughout the entire board and dryer range. The drying effect is influenced by multiple factors such as wood species, veneer thickness, initial moisture content, target moisture content, drying temperature, air flow rate, moisture removal rate, and resid…
A Video Interactive Platform For Global Opportunities
Copyrights © 2026 aeco-pi.com All Rights.Reserved .
