Round particle edge sealing hot melt adhesive

【Brand】Minli 【Model】FAWCETTL ML340 EVA edge banding hot melt adhesive features: fast melting speed, wide applicability, excellent adhesion, high final bonding strength, no odor, low dosage Application range: Edge banding, mechanical feed speed starts from 12 m/min. Edge banding materials: solid wood, veneer,( 68335011,non-woven) veneer, PVC, etc. Particularly suitable for density board, particle board, plywood, etc. Whether it is suitable for each edge banding material is related to the back coating of the edge banding material. Technical parameters:  EVA content: about 34%  Resin content: about 25%  Calcium carbonate content: about 40%  Antioxidant content: about 1%  Hot spot resistance: > 68℃  Softening point: (Ring & Ball) about 100℃ (221°F)   Viscosity: (Brookfield) about 110,000mPas/180℃(356°F) About 80,000mPas/200℃（392°F） Heat resistance: about 90℃（194°F） This experiment is based on 0.6mm veneer, ordinary heating method test.   Instructions for use: Recommended…